Litcius/Paper detail

Adsorption of triclosan from aqueous solution onto char derived from palm kernel shell

Mutiara Triwiswara, Chang‐Gu Lee, Joon‐Kwan Moon, Seong‐Jik Park

2020Desalination and Water Treatment34 citationsDOIOpen Access PDF

Abstract

ABSTRACT Char derived from palm kernel shell (PKS-char) was evaluated as an adsorbent for the removal of triclosan, an antimicrobial agent used in consumer products, from aqueous medium. Despite the low specific surface area of PKS-char, its average pore size is 4.1 nm, which is suitable for the penetration of triclosan into the inner pores. Kinetic experiments showed that with initial triclosan concentrations of 5 and 50 mg L -1 , adsorption equilibrium was reached at 6 and 12 h, respectively. The Langmuir model described the equilibrium adsorption of triclosan to PKS-char more suitably than the Freundlich model, indicating that triclosan was adsorbed on PKS-char as a monolayer. The maximum capacity of PKS-char for triclosan adsorption was 88.854 mg g -1 , which is higher than that of some commercial activated carbon samples. Triclosan adsorption decreased gradually as the pH increased from 4 to 8, but decreased sharply above pH 8. Thermodynamic experiments showed that the adsorption of triclosan by PKS-char is endothermic and spontaneous under the present experimental conditions. It can be concluded that PKS-char is a low-cost but effective adsorbent for the removal of triclosan from aqueous solutions.

Topics & Concepts

TriclosanCharAdsorptionAqueous solutionChemistryPalm kernelLangmuirActivated carbonMonolayerLangmuir adsorption modelChemical engineeringNuclear chemistryOrganic chemistryPyrolysisEngineeringPalm oilPathologyFood scienceMedicineBiochemistryLuminescence and Fluorescent MaterialsAdsorption and biosorption for pollutant removalPolydiacetylene-based materials and applications