Experimental study of graphene-based nanofluid dispersions stability for efficient heat transmission within a concentric tube heat exchanger
Walid Aich, Faïçal Khlissa, Badr M. Alshammari, Lioua Kolsi
Abstract
This study undertook the experimental enhancement of dispersion stability in graphene-based nanofluids to boost the performance of concentric counterflow heat exchangers. Emphasis was placed on the characterization and preparation of graphene suspensions by evaluating their dispersion properties in various solvents: water, ethanol, acetone, and dimethylformamide (DMF). The graphene powder underwent comprehensive analysis using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy (FTIR). Subsequently, graphene suspensions were prepared and uniformly mixed using both a magnetic stirrer and an ultrasonic vibrator. The investigation confirmed that solvent type significantly influences the stability and solubility of the suspensions. Solutions of reduced graphene oxide (rGO) in water, ethanol, and DMF exhibited remarkable long-term stability, contrasting with those in acetone. Water emerged as the superior solvent for developing the thermal transport fluid. The addition of graphene resulted in a conductivity increase of approximately 48.15% at φ=0.5% concentration, while the best thermal efficiency was attained at φ=0.35% and a flow rate of 3 L/min. Furthermore, at lower flow rates, it is advisable to avoid higher concentrations to maintain optimal thermal efficiency.