Effect of low dosage crumbed rubber on the mechanical properties of a dense graded asphalt mixture
Greg White, Andy Kidd, T. Shadforth
Abstract
The benefits of crumb rubber modification of bituminous binder for asphalt mixture production is well established. Although most research has used high (20–30% by mass of the bitumen) crumb rubber dosages, there is now interest in low (5–15%) dosages for use in local road surfacing, where mechanical properties are less important. This paper quantifies the effects of low-dosage crumb rubber on the mechanical properties of a typical dense graded local road surface mixture. It was concluded that 5–10% crumb rubber dosage significantly increased the deformation (rutting) resistance and crack (fatigue) resistance of the asphalt. The effect of crumb rubber on mixture stiffness (modulus), moisture damage (stripping) resistance and workability (compactability) was mixed but was unlikely to present any practically important benefit or detriment. Consequently, 5–10% was concluded to be the preferred range of crumb rubber dosage for dense graded asphalt for local road surfacing.