Life-cycle health monitoring of composite structures using piezoelectric sensor network
Yinghong Yu, Xiao Liu, Jun Li, Yishou Wang, Xinlin Qing
Abstract
Abstract The vacuum-assisted resin infusion (VARI) technique provides considerable advantages in manufacturing large-scale composite structures. An accurate and consecutive structural health monitoring system is urgently required to determine the initial quality and assess the structural integrity of a composite structure. In this paper, a real-time active smart diagnostic system (SDS) based on piezoelectric sensor network is proposed to monitor the whole life-cycle of composite structures. Experiments were conducted on carbon fiber reinforced plastic specimens with different thicknesses to investigate the monitoring capability of piezoelectric lead-zirconate-titanate (PZT) sensors used in the SDS approach. The PZT sensor networks inserted inside the composite structures during the VARI process are used to monitor not only the curing parameters, but also the health status of composite structures when they are in service after curing. To monitor the curing process only, the sensor network can also be installed on the bottom of the mould. Experimental results demonstrate that both 3D resin flow and degree of cure in the VARI process can be effectively monitored by the PZT sensor network. Meanwhile, the embedded PZT sensor network has the potential to identify the different stages in the curing process. It is obvious that the piezoelectric sensor network will provide important technical support for composite materials with the structure and function integrated.