Design Method of <i>LCL</i> Filter for Grid-Connected Inverter Based on Particle Swarm Optimization and Screening Method
Yuxi Cai, Yingjie He, Hongwei Zhou, Jinjun Liu
Abstract
The trial and error method is the conventional method for LCL parameter design. Its efficiency is low and it is difficult to obtain the optimal parameter. Furthermore, due to the lack of detailed analysis of the high-frequency harmonics in the inverter output voltage, the designed LCL filter cannot effectively filter them, resulting that the quality of the grid-connected current cannot fully meet IEEE 519 standard. Based on the above-mentioned problems, the high-frequency harmonics of inverter output voltage is analyzed in detail in this article, and the multiobjective optimization function, including five optimization objectives, is constructed. Combined with the particle swarm optimization, a screening method is proposed to realize the multiobjective optimization process. Under the proposed method, the LCL parameter, which happens to meet the requirement of IEEE 519 for the high-frequency harmonic distortion rate of the grid-connected current, can be obtained, and the greatest tradeoff of LCL filtering performance and filter cost is achieved. In addition, the proposed method considers the problem of weak grid and provides a complete engineering solution for LCL parameter design in different degrees of weak grid. Finally, the effectiveness and accuracy of the proposed design method are verified by contrast simulation and experiment.