Litcius/Paper detail

Low Interface Trapped Charge Density for AlO/β-GaO (001) Metal-Insulator-Semiconductor Capacitor<sub/> <sub/> <sub/> <sub/>

Qihao Zhang, Yisong Shen, Jiangwei Liu, Chunming Tu, Dongyuan Zhai, He Min, Jiwu Lu

2022IEEE Journal of the Electron Devices Society13 citationsDOIOpen Access PDF

Abstract

In this letter, high-performance Al2O3/β-Ga2O3 (001) metal-insulator-semiconductor (MIS) capacitor has been demonstrated. The capacitance-voltage (C.V) curves of the Al2O3/β-Ga2O3 (001) MIS capacitor remain stable under different measurement frequencies. The leakage current density is lower than 2.0 × 10-8 A/cm2 when the gate voltage is in the range of –5 13 V. The fixed charge and trapped charge densities in Al2O3 film are 4.4 × 1012 and 6.0 × 1011 cm-2, respectively. Average and minimum interface trapped charge density (Dit) for Al2O3/β-Ga2O3 (001) interface has been extracted to be as low as 3.3 × 1011 and 2.3 × 1011 cm-2 eV-1 via the Terman method, respectively. The low Dit is probably attributed to the modification of vacancy defects and the introduction of hydroxyl groups at the Al2O3/β-Ga2O3 (001) interface after piranha solution pretreatment for β-Ga2O3.

Topics & Concepts

CapacitorCapacitanceMaterials scienceSemiconductorInsulator (electricity)Charge densityVoltageOptoelectronicsVacancy defectAnalytical Chemistry (journal)Current densityMetalCharge (physics)Leakage (economics)Electrical engineeringCondensed matter physicsChemistryElectrodePhysicsMetallurgyPhysical chemistryEconomicsMacroeconomicsQuantum mechanicsEngineeringChromatographyGa2O3 and related materialsZnO doping and propertiesSemiconductor materials and devices
Low Interface Trapped Charge Density for AlO/β-GaO (001) Metal-Insulator-Semiconductor Capacitor<sub/> <sub/> <sub/> <sub/> | Litcius