Investigation of Meshing Strategy on Mechanical Behaviour of Hip Stem Implant Design Using FEA
Ikhsan Ikhsan, Joko Triyono, Aditya Rio Prabowo, Jung Min Sohn
Abstract
Abstract Hip joint is an important human joints system. The damaged hip joints need to be replaced with artificial hip joints. The Study of the hip joint is very costly therefore another calculation method is demanded to produce good result in acceptable time and cost. Considering this problem, a series of study to assess hip joint performance is conducted using numerical approach. Important parameter for example applied materials are used in the modelling by idealizing Ti-6Al-4V compared to SS 316 L, and stemlengthwas chosen to be 128 mm. ANSYS software was used to analyze models, and designed element size variations were set to be in range 1 to 2.5 mm. The magnitude of force was placed on the femoral head with an angle of 16 ∘ C from the vertical axis. Results showed that SS 316 L material has smaller deformation than Ti material. Whereas Central Processing (CP) time decreases in increasing element size for both materials. In addition, more variations in mesh size are needed to get more accurate convergent results.