Thermal and geometry impacts on the structure and mechanical properties of part produced by polymer additive manufacturing
Sébastien Charlon, J. Soulestin
Abstract
Abstract A relatively new additive manufacturing machine called Freeformer was employed as an alternative to common Fused Filament Fabrication (FFF) machines. While FFF machines are fed with expensive and few commercially available filament feedstock, Freeformer is fed with cheap and common polymer pellets. In this study, more than 400 dumbbells made of Acrylonitrile Butadiene Styrene (ABS) were processed varying many processing conditions to evaluate their impacts on the structure and so on, the mechanical properties of 3D parts. Among processing parameter, nozzle temperature, manufacturing chamber temperature, discharge parameters, filling density, raster geometry, slicing distance, number of contour lines, processing speed, filling raster‐contour lines overlap, and processing angles were studied. Images obtained with a scanning electron microscope and 3D part density estimations reveal strong changes on the 3D part structure as a function of the processing parameters so that tensile tests exhibit high variations between the 3D part mechanical properties.