Effect of electrical operating conditions on thermal behavior of PV modules: Numerical and experimental analysis

Abstract

The rapid growth of photovoltaic (PV) energy has the potential to transform the global energy landscape. However, the intermittent nature of solar power presents significant challenges to grid integration, such as overgeneration and curtailment. Consequently, PV systems may operate at points other than the maximum power point (MPP). Monitoring the thermal behavior of photovoltaic systems is critical due to its impact on productivity and system health. Most studies focus on meteorological variables, often overlooking the influence of electrical operating states on thermal performance. Thus the objective is to evaluate the accuracy of existing thermal models from the literature and widely used specialized software tools—alongside their commonly cited coefficients against different electrical operating status (EOS). This study investigates the thermal behavior of PV modules under different EOS: short-circuited (PVset-1), open-circuited (PVset-2), and operating at MPP (PVset-3). The experiment was conducted over four months at Jaén University campus in Spain. Results showed the short-circuited module's temperature was 6.90 °C higher, and the open-circuited module's temperature was 3.67 °C higher than the MPP module. Thermographic investigations revealed multiple hotspots in the short-circuited set. These hotspots can severely impact the module's long-term reliability and efficiency. The analysis of thermal models considering these operating states indicated an overestimation of the MPP module's temperature. However, the Keddouda model demonstrated high accuracy potential, with an average deviation of less than 3.4 %, particularly at high irradiance levels. These findings highlight the necessity of considering EOS in thermal models to enhance the accuracy and reliability of PV system performance assessments. • Analysis of the impact of electrical operating points on PV module temperatures. • The precision of thermal models when the PV module is not at MPPT is analyzed. • Short-circuited photovoltaic modules' temperature is up to 9.35 °C higher PV modules at MPP. • Open-circuited modules have is up to 4.35 °C higher PV modules at MPP. • Short-circuited photovoltaic modules create hotspots, posing hazards to module health. • Keddouda model is highly precise, with less than 3 % deviation in estimating module temperature at MPP. • NOCT and Faiman models tend to overestimate maximum power point module temperature by 15–17 %.

Topics & Concepts