Experimental investigation on reservoir damage caused by clay minerals after water injection in low permeability sandstone reservoirs

Abstract

Abstract Water injection is an effective method for developing low permeability sandstone reservoirs. In the process of water flooding, reservoir damage can occur due to clay mineral content changes and it will significantly affect oil production. There are few investigations on the changes in clay mineral content and the degree of reservoir damage after injecting the water into low permeability sandstone reservoirs with different permeabilities and lithologies. In this study, low permeability natural cores from different lithological strata were collected from 4 wells in the Daqing sandstone reservoir, and clay mineral components and contents were measured through X-ray diffraction. Changes in the clay mineral content were determined after water injection. The reservoir damage mechanism by clay mineral migration was determined by analyzing scanning electron microscopy (SEM) images after water injection. Meanwhile, the porosity and permeability of the cores were tested after water injection, and the degree of reservoir damage in different lithological strata was determined. The clay mineral content ranges from 6.78 to 14.14% in low permeability sandstone cores and declines by 49.73% after water flooding. Illite, chlorite and illite/smectite mostly decrease, and kaolinite decreases the least. Due to the large particle size of kaolinite, kaolinite migration will block the pore-throats and cause formation damage after water flooding. In argillaceous siltstone and siltstone, kaolinite particles blocking pore-throats are very serious, and the permeability decreases greatly by 21.87–36.89% after water injection. With increasing permeability, the permeability decreases greatly after water injection. The findings of this study can help to better understand the mechanisms of formation damage after injecting water into low permeability sandstone reservoirs.

Topics & Concepts