Analysis of Stress-Strain State for a Cylindrical Tank Wall Defected Zone
Nurlan Zhangabay, Bayan Sapargaliyeva, Ulanbator Suleimenov, Khassen Abshenov, Akmaral Utelbayeva, Alexandr Kolesnikov, Kanat Baibolov, Роман Федюк, Dinara Arinova, Bolat Duissenbekov, Azamat Seitkhanov, Mugahed Amran
Abstract
In the study, experimental and theoretical studies were carried out to assess the influence of the shapes of dents in the tank wall on the stress-strain state of the defect zone. By testing fragments of a cylindrical tank, it was found that the most appropriate expression is (5), which could take into account the leaching of the tank wall, resulting in a decrease in the stress concentration index. At the same time, during theoretical studies in this paper, it was found that polynomials determined the stress concentration coefficient, where the obtained analytical expression data were compared with the data determined numerically in the ANSYS program, and it was found that the spread was from 2% to 10%. According to the results of a numerical study of the stress-strain state of the dent zone in the tank wall, graphical dependences of the stress concentration coefficient on the dimensionless depth of the dent for various values of the dimensionless radius of the dents and do not exceed 2% of the indicators that are obtained. At the conclusion of the experimental and numerical studies, a conclusion was made about the degree of influence of the geometric dimensions of the dents on the stress concentration index.