Water hammer in pipelines based on different friction models
Dan Jiang, Chen Zeng, Qixia Lu, Qing Guo
Abstract
Water hammer in pipelines is a difficult problem in fluid transmission field. Especially, there exists some friction items of pipeline transient model such that the simulation model is not consistent to the experimental results. By using the friction model proposed by Kagawa and the model of impulse response function, the pressure transients are calculated with and without cavitation. The corresponding simulation results involving pressure, velocity, steady and dynamic frictions, cavitation volume are analyzed to reveal the effect of friction item on pressure transients. Moreover, the features of steady and dynamic frictions are captured in pipelines with upstream and downstream valves. The comparative simulation results of two friction models have verified that the friction model using an impulse response function has higher consistency between simulation and experimental results of pipeline transients.