Litcius/Paper detail

Multipath Flow Metering of High-Velocity Gas Using Ultrasonic Phased-Arrays

Christoph Haugwitz, Claas Hartmann, Gianni Allevato, Matthias Rutsch, Jan Hinrichs, Johannes Brötz, Dieter Bothe, Peter F. Pelz, Mario Kupnik

2022IEEE Open Journal of Ultrasonics Ferroelectrics and Frequency Control22 citationsDOIOpen Access PDF

Abstract

In this work we combine a multipath ultrasonic gas flow meter (UFM) with an ultrasonic air-coupled phased-array. This allows complementing the advantages of a multipath UFM, i.e. higher accuracy and more robustness to irregular flow, with the extended velocity measuring range due to sound drift compensation via a phased-array. We created a 3D-printed flow meter consisting of an <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$8 \times 8\,\,\lambda /2$ </tex-math></inline-formula> phased-array for transmission and 14 individual receivers for seven upstream and seven downstream sound paths. Measurements were conducted in a test rig with a maximum gas flow rates of 8.3 m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> s <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> (107 ms <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> ). A differential pressure nozzle was used as reference sensor. Three configurations were compared: Parallel sound paths with a single transmitter; parallel sound paths with the phased-array as transmitter; and fan-shaped sound paths with the phased-array as transmitter. The signal-to-noise ratio (SNR) and deviation of measured flow were used as comparison criteria. In addition, we measured the optimum steering angles of the phased-array required to compensate the sound drift effect. Using the phased-array with the sound drift effect compensation enabled and disabled, the SNR increases by 10.6 dB and 4.95 dB, respectively, compared to the single transmitter setup at 83 m s <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> . Furthermore, the phased-array with compensation active, extends the velocity measuring range by 29%, from 83 ms <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> to 107 m s <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−1</sup> , while maintaining a similar standard deviation of the flow measured. Besides demonstrating that a phased-array in a gas flow meter significantly extends the measurement range, our setup qualifies as versatile research platform for designing future high-velocity gas flow meters.

Topics & Concepts

TransmitterMultipath propagationPhased arrayUltrasonic sensorMetering modeAcousticsComputer sciencePhysicsEngineeringElectrical engineeringMechanical engineeringChannel (broadcasting)Antenna (radio)Flow Measurement and AnalysisAdvanced Sensor Technologies ResearchElectrical and Bioimpedance Tomography
Multipath Flow Metering of High-Velocity Gas Using Ultrasonic Phased-Arrays | Litcius