Surface Engineering and Nb<sub>2</sub>CT<sub>x</sub>‐Modulated CsPbCl<sub>3</sub> Perovskite for Self‐Powered UV Photodetectors with Ultrahigh Responsivity
Guangcan Luo, Yabing Wang, Mingfen Mao, Baofen Cen, Tengfei Wang, Qinghong Li, Kaixiang Liu, Jing Zhang, Shengyun Luo, Pengfei Kong
Abstract
Abstract All‐inorganic CsPbCl 3 perovskite has emerged as a promising material for ultraviolet (UV) photodetection, attributed to its appropriate bandgap and exceptional optoelectronic properties. However, the suboptimal film‐forming quality of the solution process, as well as the instability of films induced by UV radiation and the annealing process, have limited its popularization and application. Herein, the buried layer is pretreated with N, N‐dimethylacetamide (DMF) to improve surface hydrophilicity and facilitate the anchoring of Pb 2+ . Additionally, Nb 2 CT x is incorporated into the PbCl 2 precursor solution to enhance the quality of CsPbCl 3 films. Following surface engineering and Nb 2 CT x modification (CsPbCl 3 @Nb 2 CT x ), the morphology and optoelectronic properties of CsPbCl 3 films are optimized. Furthermore, the effect of lattice strain and defect state‐induced interface state on the nonradiative charge recombination is mitigated. Ultimately, the UV photodetector fabricated on fluorine‐doped tin oxide (FTO)/SnO 2 /CsPbCl 3 @Nb 2 CT x /Au architecture exhibits outstanding performance including remarkably high responsivity (up to 990 mA W −1 ), significant specific detectivity (1.03 × 10 11 cm Hz 1/2 W −1 ), and rapid rise/decay time (0.24/0.32 µs) under self‐powered mode, with markedly improved stability as well. This approach presents a novel strategy for optimizing CsPbCl 3 films through MXene modulation as an immense potential absorb layer for UV photodetector.