Understanding Friction in Cam–Tappet Contacts—An Application-Oriented Time-Dependent Simulation Approach Considering Surface Asperities and Edge Effects
Christian Orgeldinger, Stephan Tremmel
Abstract
With the increasing challenges of climate change and scarce resources, the development of sustainable and energy-efficient technical systems is becoming increasingly important. In many applications, the friction losses occurring in contacts have a decisive influence on the overall efficiency. At this point, tribological contact optimization can make an important contribution to increasing the efficiency of technical systems. However, improvements are often associated with a considerable experimental effort. To reduce the development time, additional simulation models can be applied to predict the tribological behavior. This requires the closest possible approximation of the real contact within a numerical model. This paper presents a simulation approach for the time-dependent simulation of a cam–tappet contact. The simulation uses realistic operating conditions as they arise in the valve train of internal combustion engines. The influence of edge effects on the friction behavior is considered by a scaled calculation area and the influence of the surface roughness is investigated using stochastic asperity models. It is shown that the tribological behavior within the contact strongly depends on the surface properties and the load spectrum used. In addition, edge effects on the sides of the contact area have a clear influence on the pressure and film thickness distribution.