Influence of the Protein Content on Fiber Morphology and Heat Treatment of Electrospun Potato Protein–Maltodextrin Fibers
Monika Gibis, Franziska Pribek, Ines Kutzli, Jochen Weiß
Abstract
The production of ultrafine fibers of proteins and polysaccharides by needleless electrospinning can be performed prior to a thermal treatment to form glycoconjugates via the first stage of the Maillard reaction. The aim was to produce potato protein–maltodextrin conjugates with a varying protein content of 0.05, 0.1, 0.15, and 0.2 g/mL by needleless electrospinning and subsequent thermal treatment (0, 6, 12, 24, and 48 h at 65 °C and 75% relative humidity). The concentrations of the maltodextrins, with a dextrose equivalent of 2 and 21, were kept constant at 0.8 and 0.1 g/mL. The highest fiber production rate was achieved with a protein content of 0.1 g/mL (5.8 ± 0.4 g/h). With increasing protein content, the production rate decreased to 2.8 ± 0.5 g/h. The fibers obtained from the spinning solution containing 0.2 g/mL protein showed the largest average diameter (4.0 ± 1.5 µm) and the broadest fiber diameter distribution. The protein content of the fibers was close to that of the corresponding spinning solution. The browning index after 48 h of heating increased for all samples (9.7–14.7) compared to the unheated samples (1.1–3.3). The results indicate that the protein content has an impact on the yield, the fiber diameter, and the morphology of the fibers.