Understanding of surface roughness of wood based on analysis its structure anddensity
Agnieszka Jankowska
Abstract
Understanding of surface roughness of wood based on analysis its structure and density. The main aim of presented paper was to investigate the influence the wood density and anatomical details on surface roughness. The scope of study included samples from ten different species of wood (mainly tropical) because of wide range of density and anatomical difference. The results allow to conclude that the roughness of tested wood species demonstrated variation, depending on the wood section and the measurement direction. In general, radial sections showed higher roughness than tangential sections due to interlocked fibres in tested wood species (fibres cut in various ways on the radial section of the wood). Roughness measured perpendicular to the wood fibres were twice as high as those measured parallel to the grain. Wood density was not an important indicator determining surface roughness for tested wood species. The determining element for the roughness measured across the fibres was the diameter of the vessels. Further research is advisable due to the enormous variability of the structure and properties of wood.