Litcius/Paper detail

Design of Broadband Doherty Power Amplifier Based on Single Loop Load Modulation Network

Ge Bai, Zhijiang Dai, Jingsong Wang, Cheng Bi, Weimin Shi, Jingzhou Pang, Mingyu Li

2024IEEE Journal on Emerging and Selected Topics in Circuits and Systems10 citationsDOI

Abstract

This paper proposes a Doherty power amplifier (DPA) architecture with potential for wideband and high efficiency, denoted as single-loop load matching network DPA (SL-LMN). The conventional single combination node network is replaced by an SL-LMN, which adds a new current combination node. This architecture can bring new circuit design freedom, which expands the operating bandwidth of the load modulation network. Using the same prototype topology, the working mechanism of SL-LMN DPA is further illustrated based on three sets of comparative designs. To prove this theory, a broadband asymmetric DPA (ADPA) functioning over 1.9-2.9 GHz is developed and fabricated using two asymmetric GaN transistors. Under continuous wave excitation, the observed data indicates that the drain efficiency of this ADPA is 42.1%-68.9% at saturation and 45.5%-58.5% at 8 dB back-off, respectively. The ADPA has a maximum output power and saturated gain of 44–46 dBm and 6.8-10.9 dB, respectively.

Topics & Concepts

AmplifierBroadbandTopology (electrical circuits)Electrical engineeringElectronic engineeringModulation (music)Bandwidth (computing)Materials scienceEngineeringComputer sciencePhysicsTelecommunicationsAcousticsAdvanced Power Amplifier DesignRadio Frequency Integrated Circuit DesignGaN-based semiconductor devices and materials
Design of Broadband Doherty Power Amplifier Based on Single Loop Load Modulation Network | Litcius