Epitaxial Engineering of FAPbBr<sub>3</sub>/FAPbBr<sub>3–<i>x</i></sub>Cl<sub><i>x</i></sub> Heterojunctions for Sensitive X-ray and α-Particle Detection
Tongyang Wang, Xin Zhang, Quanchao Zhang, Xin Liu, Haowen Luo, Yingying Hao, Ruichen Bai, Lingyan Xu, Jianxi Liu, Yadong Xu
Abstract
Halide perovskite crystals have attracted extensive research in the field of radiation detection, thanks to their superior carrier transport abilities and facile solution preparation methods. However, dark current instability is common in perovskite single-crystal devices, especially under high bias voltages. Herein, we achieve the modulation of surface defects by epitaxial growth to obtain heterogeneous crystals with high crystalline quality, developing FAPbBr 3 /FAPbBr 3– x Cl x heterojunctions to address severely increased dark current. The FAPbBr 3 /FAPbBr 2.7 Cl 0.3 heterojunction exhibits reduced trap-state density and a significant built-in potential difference. Based on the effective utilization of the dark current cutoff effect of the heterojunctions, a dark current of 0.83 μA·cm –2 is realized for the FAPbBr 3 /FAPbBr 2.7 Cl 0.3 detector, which is 7.5% of that based on an intrinsic FAPbBr 3 single crystal. Thus, an optimal sensitivity of 33612 μC·Gy air –1 ·cm –2 for Au/FAPbBr 3 /FAPbBr 2.7 Cl 0.3 /Au detector was achieved, at a bias of −250 V. Simultaneously, an energy resolution of 15.2% for 241 Am @ 5.49 MeV α-particle-induced pulse height spectra was recognized. Our work not only establishes a new benchmark for FAPbBr 3 -based perovskite performance but also presents a pragmatic strategy to lower the harmful dark current in three-dimensional halide perovskite single crystals.