Scalable Fabrication of Edge Contacts to 2D Materials: Implications for Quantum Resistance Metrology and 2D Electronics
Naveen Shetty, Hans He, Richa Mitra, Johanna Huhtasaari, Konstantina Iordanidou, Julia Wiktor, Sergey Kubatkin, Saroj P. Dash, Rositsa Yakimova, Lunjie Zeng, Eva Olsson, Samuel Lara‐Avila
Abstract
High Resolution Image Download MS PowerPoint Slide We report a reliable and scalable fabrication method for producing electrical contacts to two-dimensional (2D) materials based on the tri-layer resist system. We demonstrate the applicability of this method in devices fabricated on epitaxial graphene on silicon carbide (epigraphene) used as a scalable 2D material platform. For epigraphene, data on nearly 70 contacts result in median values of the one-dimensional (1D) specific contact resistances ρ c ∼ 67 Ω·μm and follow the Landauer quantum limit ρ c ∼ n –1/2, consistently reaching values ρ c < 50 Ω·μm at high carrier density n . As a proof of concept, we apply the same fabrication method to the transition metal dichalcogenide (TMDC) molybdenum disulfide (MoS 2 ). Our edge contacts enable MoS 2 field-effect transistor (FET) behavior with an ON/OFF ratio of >10 6 at room temperature (>10 9 at cryogenic temperatures). The fabrication route demonstrated here allows for contact metallization using thermal evaporation and also by sputtering, giving an additional flexibility when designing electrical interfaces, which is key in practical devices and when exploring the electrical properties of emerging materials.