Jumping liquid metal droplets controlled electrochemically
Minyung Song, Nazgol Mehrabian, Sahil Karuturi, Michael D. Dickey
Abstract
Jumping droplets are interesting because of their applications in energy harvesting, heat transfer, anti-icing surfaces, and displays. Typically, droplets “jump” from a surface when two or more drops coalesce. Here, we demonstrate an approach to get a single droplet of liquid metal (eutectic gallium indium) to jump by using electrochemistry in a solution of 1M NaOH. Applying a positive potential to the metal (∼1 V relative to the open circuit potential) drives electrochemical surface oxidation that lowers the interfacial tension from ∼450 mN/m to ∼0 mN/m. In the low interfacial tension state, the droplet flattens due to gravity. Rapid switching to a negative potential (relative to the open circuit potential) reduces the surface oxide, returning the deformed droplet to a state of high interfacial tension. This rapid change in interfacial tension in the flattened state generates excess surface energy, which drives the droplet to return to a spherical shape with enough momentum that the liquid droplet jumps. This work is unique because (1) the jumping is controlled and tuned electrically, (2) the approach works with a single droplet, (3) it does not require a superhydrophobic surface, which is typically used to prevent droplets from adhering to the substrate, (4) the drops jump through a viscous medium rather than air, and (5) the potential energy obtained by the jumping drops is one order of magnitude higher than previous approaches. Yet, a limitation of this approach relative to conventional jumping drops is the need for electrolyte and a source of electricity to enable jumping. Herein, we characterize and optimize the jumping height (∼6 mm for a 3.6 mm diameter drop) by changing the reductive and oxidative potential and time.