Frequency adjustment method for in-situ seismic modulus of asphalt concrete
Yi Li, Jiahao Li, Yue Hu, Lijun Sun
Abstract
In a mechanistic-empirical (ME) pavement design method, the modulus of asphalt concrete (AC) is essential. The in-situ AC modulus can be obtained by the surface wave method (SWM). However, the measured modulus needs to be adjusted to the design frequency values. This study aimed to propose a frequency adjustment method for the in-situ AC seismic modulus. For this purpose, coring and dynamic modulus tests, FWD (Falling Weight Deflectometer) tests, and PSPA (Portable Seismic Pavement Analyzer) tests were carried out in the accelerated pavement test (APT). The master curves generated by the dynamic modulus results correlated well with the moduli determined from the other tests. Based on this relationship, a frequency adjustment factor was developed for the seismic modulus of the undamaged AC layer. For the damaged AC layer, the proposed factor was modified by incorporating the effect of the damage. Finally, to validate the frequency adjustment factor, the measured maximum tensile strains in the APT were compared with the values determined from the adjusted seismic moduli. The results prove that the frequency adjustment factor is appropriate to obtain the design modulus from the surface wave test. The PSPA test is also recommended to obtain the in-situ AC seismic modulus.