Litcius/Paper detail

Effect of particle size on SiO2 nanofluid viscosity determined by a two-step method

Gökberk Yalçın, Semiha Öztuna, Ahmet Selim Dalkılıç, Somchai Wongwises

2024Journal of Thermal Analysis and Calorimetry10 citationsDOIOpen Access PDF

Abstract

Abstract According to review of the literature, the influence of nanoparticle diameter with irregular shapes on viscosity requires further research since there is no relation between particle size and nanofluid stability. In this study, SiO 2 /EG–water-based nanofluid samples were prepared, and their viscosities were experimentally determined. SiO 2 nanoparticles had sizes of 7, 15, and 40 nm, and the base fluid was a 50% ethylene glycol and 50% water mixture. Nanofluid samples were prepared using a two-step technique. Viscosity change was measured every 10 °C from 20 to 60 °C. The maximum viscosity values were observed for 7, 15, and 40 nm particles over an entire concentration range. Considering all measurements, the highest viscosity increase was 60.51% for 3% SiO 2 (7 nm) at 60 °C, and the lowest viscosity change was 7.72% for 1% SiO 2 (40 nm) at 40 °C. The most stable sample of the current study was 1% SiO 2 (15 nm), and its Zeta potential was − 35.6 mV. Finally, a new empirical equation that included temperature, particle diameter, and concentration terms is suggested to predict dynamic viscosity, with R adj 2 = 0.98. It was also compared with previous correlations.

Topics & Concepts

NanofluidViscosityParticle sizeMaterials scienceParticle (ecology)Chemical engineeringThermodynamicsNanoparticleNanotechnologyComposite materialPhysicsEngineeringOceanographyGeologyNanofluid Flow and Heat TransferHeat Transfer MechanismsSolar Thermal and Photovoltaic Systems
Effect of particle size on SiO2 nanofluid viscosity determined by a two-step method | Litcius