On concurrent multiscale topology optimization for porous structures under hygro‐thermo‐elastic multiphysics with considering evaporation
Musaddiq Al Ali, Masatoshi SHIMODA
Abstract
Abstract Lightweight polymeric and natural composite materials are extensively used in modern structures, especially with the demands for environmentally friendly products as well as lowering energy consumption. Furthermore, a high performance‐to‐weight ratio can be attained by utilizing porous composites. However, hygral and thermally induced loads are limiting the robustness of polymeric and natural composite materials, therefore; in this research, concurrent multiscale multiphysics topology optimization is used to design lightweight porous composite structures that have resilience toward mechanical as well as hygral and thermal loads. By establishing two independent representations of the design problem, that is, macro and microscale domains, a concurrent topology optimization framework is implemented, and the effective properties of the microscale (i.e., elastic, thermal conductivity, moisture diffusivity tensors, and hygral as well as thermal expansion coefficients) are calculated and used as the hygro‐thermo‐elastic properties of the macroscale using in‐house MATLAB codes. For hygral physics, moisture transport, as well as evaporation, are simultaneously considered in this study. A sensitivity analysis was conducted on the multiphysics concurrent optimization scheme in order to account for the coupling of macro and microstructure, as well as hygro‐thermo‐elastic physics. Multiple numerical cases were examined, which included different loading and boundary conditions, as well as various spatial configurations. The results showed attaining a high stiffness‐to‐weight ratio for the multiscale optimized porous structure compared to the single‐scale solid structure. Furthermore, a study was conducted on multiple microstructure subsystems to examine the impact of microstructure systems on macrostructure dependence. By combining several microstructures into a single macro design domain, design flexibility was enhanced and the performance‐to‐weight ratio was improved. The study was expanded to include the evaluation of hygro‐thermo‐elastic multiscale multiphysics with an evaporation problem, which was demonstrated through several numerical examples. The introduced formulations showed a successful application of the concurrent multiscale optimization formulations and good coupling on the macro and microscale. Also, the formulations demonstrated a strong influence between the macro and the microscale of the design problem for the topology optimization methods. The successful application of the concurrent multiscale optimization method in this research highlights its potential for designing more efficient and effective structures in the future.