Improvement of Photovoltaic Performance of Perovskite Solar Cells by Synergistic Modulation of SnO<sub>2</sub> and Perovskite via Interfacial Modification
Jinliang Shen, Xiang Ge, Qing Ge, Na Li, Yuhang Wang, Xudong Liu, Junlei Tao, Tingwei He, Shaopeng Yang
Abstract
In the past decade, perovskite solar cell (PSC) photoelectric conversion efficiency has advanced significantly, and tin dioxide (SnO 2 ) has been extensively used as the electron transport layer (ETL). Due to its high electron mobility, strong chemical stability, energy level matching with perovskite, and easy low-temperature fabrication, SnO 2 is one of the most effective ETL materials. However, the SnO 2 material as an ETL has its limitations. For example, SnO 2 films prepared by low-temperature spin-coating contain a large number of oxygen vacancies, resulting in energy loss and high open-circuit voltage ( V OC ) loss. In addition, the crystal quality of perovskites is closely related to the substrate, and the disordered crystal orientation will lead to ion migration, resulting in a large number of uncoordinated Pb 2+ defects. Therefore, interface optimization is essential to improve the efficiency and stability of the PSC. In this work, 2-(5-chloro-2-benzotriazolyl)-6- tert -butyl-p-cresol (CBTBC) was introduced for ETL modification. On the one hand, the hydroxyl group of CBTBC forms a Lewis mixture with the Sn atom, which reduces the oxygen vacancy defect and prevents nonradiative recombination. On the other hand, the SnO 2 /CBTBC interface can effectively improve the crystal orientation of perovskite by influencing the crystallization kinetics of perovskite, and the nitrogen element in CBTBC can effectively passivate the uncoordinated Pb 2+ defects at the SnO 2 /perovskite interface. Finally, the prevailing PCE of PSC (1.68 eV) modified by CBTBC was 20.34% ( V OC = 1.214 V, J SC = 20.49 mA/cm 2, FF = 82.49%).