Exploration of p-type conductivity in β-Ga2O3 through Se-Mg hyper co-doped: An ion implantation approach
Yimin Liao, Hanzhao Song, Zhigao Xie, Chuang Zhang, Chee‐Keong Tan
Abstract
As β- Ga 2 O 3 continues to advance, achieving stable p -type doping has become a key research focus. This study proposes a method to introduce defect energy levels near the conduction band and acceptor doping elements to achieve p -type doped β- Ga 2 O 3 . We utilized ion implantation to achieve co-doped Ga 2 O 3 with Se and Mg elements, employing a 50 kV acceleration voltage to reach a peak purity concentration depth. The concentrations of Se and Mg were quantified, with the highest concentrations reaching 2.35 × 10 22 /cm 3 (Se) and 8.99 × 10 21 /cm 3 (Mg), consistent with simulation results. After implantation, the Se-Mg co-doped β- Ga 2 O 3 underwent rapid thermal annealing at 850 °C in an oxygen environment to mitigate implantation damage. By adjusting the Se and Mg implantation dose, we could slightly tune the bandgap from 4.42 to 4.37 eV. Experimental characteristics revealed valence band maximum values and exhibited potential p -type behavior achieved by Se-Mg co-doping. Hall measurements indicated probable p -type conductivity. However, further verification is required. Additionally, first-principles density functional theory simulations provided calculations of substitutional defect formation energies and Fermi levels within the β- Ga 2 O 3 lattice, further elucidating the causes of electronic structure changes induced by doping.