Phase transformation and residual stresses after laser surface modification of metastable austenitic stainless steel
Mohammad Rezayat, J.J. Roa, Antonio Mateo García
Abstract
Laser surface modification treatments have been applied to samples of a metastable austenitic stainless steel AISI 301LN. The amount of residual stresses and the presence of induced a´-martensite phase on the surface and subsurface of the samples, as a consequence of laser modification, have been investigated in this study. X-ray diffraction has been used to measure these values, which is a non-destructive method. Laser modification has been applied as parallel lines at a distance of 40 µm, using a laser intensity of 4 A and scanning speeds of 1, 3, and 5 bits/ms, frequency had a constant value of 1000 Hz. The results of the phase analysis show an increase in the a´-martensite present in the surface modified by the laser and that the sample corresponding to the lowest laser speed has the highest martensite fraction. Also, high tensile residual stresses were generated, more pronounced for the lowest laser scanning speed.