Litcius/Paper detail

Triboelectric nanogenerator based on silane-coupled LTA/PDMS for physiological monitoring and biomechanical energy harvesting

Muhammad Umair Khan, Deepa K. Dumbre, Yawar Abbas, Moh’d Rezeq, Anas Alazzam, Nahla Alamoodi, Maryam Khaleel, Baker Mohammad

2024Microsystems & Nanoengineering18 citationsDOIOpen Access PDF

Abstract

Abstract Energy harvesting from ambient sources present in the environment is essential to replace traditional energy sources. These strategies can diversify the energy sources, reduce maintenance, lower costs, and provide near-perpetual operation of the devices. In this work, a triboelectric nanogenerator (TENG) based on silane-coupled Linde type A/polydimethylsiloxane (LTA/PDMS) is developed for harsh environmental conditions. The silane-coupled LTA/PDMS-based TENG can produce a high output power density of 42.6 µW/cm 2 at a load resistance of 10 MΩ and operates at an open-circuit voltage of 120 V and a short-circuit current of 15 µA under a damping frequency of 14 Hz. Furthermore, the device shows ultra-robust and stable cyclic repeatability for more than 30 k cycles. The fabricated TENG is used for the physiological monitoring and charging of commercial capacitors to drive low-power electronic devices. Hence, these results suggest that the silane-coupled LTA/PDMS approach can be used to fabricate ultra-robust TENGs for harsh environmental conditions and also provides an effective path toward wearable self-powered microelectronic devices.

Topics & Concepts

Triboelectric effectNanogeneratorEnergy harvestingPolydimethylsiloxaneMaterials scienceMicroelectronicsElectrical engineeringCapacitorSilaneVoltageOptoelectronicsPower densityPower (physics)NanotechnologyEngineeringComposite materialQuantum mechanicsPhysicsAdvanced Sensor and Energy Harvesting MaterialsConducting polymers and applicationsTactile and Sensory Interactions
Triboelectric nanogenerator based on silane-coupled LTA/PDMS for physiological monitoring and biomechanical energy harvesting | Litcius