Development of a New Micro Drilling Tool with H-Shaped Chisel Edge
Yue Ma, Zhiqiang Liang, Kun Wan, Rongbin Cai, Linfeng Yi, Jianfei Li, Fei Wang, Xu Zhao, Rui Chen, Xibin Wang
Abstract
In order to improve the tool life and micro-hole machining quality, the H-shaped chisel edge micro-drill (HCE-MD) was developed in this paper. The HCE-MD was characterized by the inner edge formed through the chisel edge thinning. In the micro-drilling process, the inner edge can perform positive rake cutting, so the machining area of the workpiece extruded by cutting edge with a negative rake angle is reduced. Based on this, the distribution of rake angle near the chisel edge corner is improved. Then, the HCE-MD was fabricated on the six-axis CNC grinding machine. The grinding process parameters of the micro-drill were optimized based on the orthogonal grinding test and grey relational grade theory. The size and shape accuracy of the micro-drill were controlled by the multi-axis linkage grinding method and the movement-axis micro compensation method. Finally, the 0.25 mm HCE-MD was fabricated with the cutting edge radius of 1.94 μm and the flank surface roughness of 0.25 μm. The drilling performance of HCE-MD was evaluated through comparative drilling experiments. The experimental results show that, compared with common micro drill, the HCE-MD produced lower thrust force and better micro-hole roundness accuracy, and reduced the micro-drill wear on the chisel edge and the flank.