Flexural Strength of Damaged RC Beams Repaired with Carbon Fiber-Reinforced Polymer (CFRP) Using Different Techniques
Abbas Yahya Turki, Mahdi Hameed Al-Farttoosi
Abstract
In this study, an experimental program was developed to investigate the flexural behavior of pre-damaged reinforced concrete (RC) beams that had been repaired and strengthened using carbon fiber-reinforced polymer (CFRP) laminates under a monotonic load. Two techniques were used: externally bonded reinforcement (EBR) and near-surface-mounted (NSM) reinforcement, to repair and strengthen the tested beams. The experimental program involved casting and testing nine simply supported RC rectangular beams; one beam was considered as the reference beam and did not undergo additional strengthening, and the remaining beams were strengthened using CFRP laminates. These eight beams were divided into two main groups for the purposes of strengthening: beams for which the EBR technique was used, and beams for which the NSM technique was used. The primary variables observed in the EBR and NSM groups included four damage percentages obtained according to the preload (20, 40, 60, and 80%) from the ultimate load carried by the reference beam. The experimental results show that decreasing the damage percentage leads to an increase in ultimate strength from about 3.6% to 17.2% for the beams repaired using the EBR technique and from 27.6% to 57% for the beams repaired using the NSM technique; additionally, the NSM method was more effective than the EBR method in terms of the flexural strength and mode of failure. However, using CFRP laminates enhances the flexure capacity of strengthened RC beams.