Chemical Pre-lithiation of SiO<sub><i>x</i></sub> Anodes with a Weakly Solvating Solution of Polycyclic Aromatic Hydrocarbons for Lithium-Ion Batteries
Xin Li, Cancan Bian, Jun Zhang, Jian Hong, Rusheng Fu, Xufeng Zhou, Zhaoping Liu, Guangjie Shao
Abstract
Silicon monoxide (SiO x, x ∼ 1) has emerged as a highly promising candidate for high-energy-density lithium-ion batteries due to its high specific capacity and suitable working potential. Nevertheless, the formation of a large quantity of irreversible products, such as Li 2 O and lithium silicates, during the initial lithiation process results in a low initial coulombic efficiency (ICE) of SiO x, which is a significant impediment to its commercial application. To overcome this limitation, two lithium aromatic complexes, namely, lithium-naphthalene-2-methyl-tetrahydrofuran ( N -LAC) and lithium-biphenyl-2-methyl-tetrahydrofuran (B-LAC), with a low redox potential are used to pre-lithiate SiO x anodes. The differences in lithiation kinetics and efficacy of the two LAC solutions are identified and assessed by scrutinizing the pre-lithiation process of SiO x materials. It is revealed that both pre-lithiation agents produce solid electrolyte interphase (SEI) films on the material surface enriched with substances such as LiF, Li 2 CO 3, and ROCO 2 Li, but the LiF content in the SEI of the N-LAC pre-lithiated electrode is significantly higher. Furthermore, the surface roughness of the N-LAC pre-lithiated electrode is lower, and the horizontal distribution of mechanical properties and surface potential tend to be more homogeneous, even during cycling, at approximately the same degree of lithiation. The results indicate that the N-LAC solutions not only improve the ICE of the SiO x material but also optimize the interfacial and structural stability of the SiO x electrode. When the pre-lithiated SiO x anode is paired with lithium-rich layered oxide cathode materials, the energy density and ICE are significantly improved compared to the cell using pristine SiO x anode.