Litcius/Paper detail

Comparative assessment of the biomass solar pyrolysis biochars combustion behavior and zinc Zn(II) adsorption

Mariusz Dudziak, Sebastian Werle, Anna Marszałek, Szymon Sobek, Aneta Magdziarz

2022Energy27 citationsDOIOpen Access PDF

Abstract

Biochars from solar pyrolysis of the waste straw, and dried sewage sludge, were assessed to recognize the possible application as unconventional adsorbents and fossils replacements for combustion purposes. The adsorption properties of the biochars were characterized by the BET (Brunauer, Emmett, and Teller) surface area, pore volumes, and the degree of Zn(II) adsorption from aqueous solutions. A higher removal degree of zinc ions of 26% was noted for biochars from dried sewage sludge with a BET area of 40.84 m2/g, compared to the waste straw biochars with a BET area of 1.67 m2/g and a corresponding removal degree of 16%. Both biochars presented more uniform combustion behavior compared to raw biomass, with the ignition and burnout temperatures similar to coal. Solar pyrolysis caused a reduction of the combustion kinetic steps, from multi-step combustion of the raw biomass to a single-step and two-step kinetic mechanisms for the sewage sludge and waste straw biochars respectively. It was found that the waste straw biochars are possible alternative fuels with a higher heating value of 22.6 MJ/kg, while sewage sludge chars presented better zinc adsorption of 2.09 mg/g and a total removal degree of 26%.

Topics & Concepts

StrawAdsorptionPyrolysisSewage sludgeBiocharZincBiomass (ecology)BET theoryCombustionFly ashChemistryRaw materialCharcoalWaste managementPulp and paper industrySpecific surface areaEnvironmental chemistryChemical engineeringSewage treatmentEnvironmental scienceEnvironmental engineeringInorganic chemistryOrganic chemistryAgronomyCatalysisBiologyEngineeringThermochemical Biomass Conversion ProcessesCoal and Its By-productsAdsorption and biosorption for pollutant removal
Comparative assessment of the biomass solar pyrolysis biochars combustion behavior and zinc Zn(II) adsorption | Litcius