Theoretical Investigation of Vapor Transport Mechanism Using Tubular Membrane Distillation Module
Adnan Alhathal Alanezi, M. Bassyouni, Shereen M. S. Abdel‐Hamid, Hassan Ahmed, M.H. Abdel‐Aziz, M. Sh. Zoromba, Yasser Elhenawy
Abstract
This paper's primary objective is to examine the vapor delivery mechanism through a tubular membrane distillation (MD) module. Experiments were conducted utilizing a hydrophobic tubular membrane module with a pore size of 0.2 µm. To establish the mass transport mechanism of water vapor, tests were carried out first with pure water as a feed. The permeate flow was then determined using NaCl aqueous feed solutions. Distilled water flux at diverse feed temperatures, feed flow rates, and feed salt concentrations was investigated. The permeate flux improved linearly with rising temperature and flow rate of the feed, however, it declined with feed concentration. Increasing temperature from 40 to 70 °C increased the permeate flux by a factor of 2.2, while increasing the feed flow rate from 60 to 120 L/h increased the permeate flux by a factor ranging from 0.7 to 1.1 depending on feed temperature. Using the Dusty gas model (DGM) the mass transport of water vapor is estimated in the membrane pores. The results showed that the water vapor delivery is controlled by way of the Knudsen molecular diffusion transition mechanism and its version changed into one capable of predicting the permeate fluxes. The mass transfer coefficient calculated and located using the Knudsen molecular transition version agreed properly with the corresponding experimental value. The delivery resistances were affected by working parameters, along with feed temperature, flow rate, and concentration. The mass transfer resistance of the membrane became the predominant controlling step to the MD process.