Design of FIR Filter Using Low-Power and High-Speed Carry Select Adder for Low-Power DSP Applications
Siliveri Swetha, N. Siva Sankara Reddy
Abstract
Adders are one of the basic arithmetic circuits of any processor, microcomputer, multiplication circuits, etc. Present the most substantial area in the research of VLSI design is area, power, and efficient high-speed circuits. In this paper two new architectures Carry Select Adder (CSLA) using D-latch and CSLA using multiplexers are proposed to reduce the power, delay, and its efficiency is compared with conventional carry select adder (CSLA) and existing literature. Architectural level power reduction is the most important area where it plays a vital role in improving the speed and power of the overall circuit. The existing and proposed CSLAs are synthesized with the Synopsys EDA tool using 32 nm technology node is used for the design and implementation. The values obtained across technology in nm underline the dominance of the proposed adder architectures in terms of delay and energy and area efficiency. For the proposed architectures, the evaluation results show that 60%–75% improvement in delay and 22%–56%in power when compared to other architectures. Proposed architectures shows increment in area but overall are delay product reduces compares to existing designs The proposed CSLA-DLATCH-FIR obtained significant reduction for 16-bits for power (46.4 (µW)), delay (0.66), ADP (359.8 × 10–15), and PDP (30.63 × 10–15). While the proposed CSLA-MUX-FIR has attained substantial performance for power (52.44 (µW)), delay (0.82 ns), ADP (457.392 × 10–15), and PDP (42.9 × 10–15). With the use of this proposed CSLA, a FIR filter was able to significantly reduce its power and delay.