Recovery of Mining Wastes in Building Materials: A Review
Alinabiwe Nyamuhanga Ally, Manjia Marcelline Blanche, Ursula Joyce Merveilles Pettang Nana, Masika Muhiwa Grâce, Ngapgue François, Chrispin Pettang
Abstract
The use of materials from waste in buildings compensates for the lack of natural resources, solves the problem of waste management and provides an alternative technique for protection of the environment. There are a large number of industrial wastes that are used for full or partial replacement of raw materials in some construction materials. This review assesses mining waste in concrete as a substitute for aggregates and cement; in fired bricks as a substitute for soil; and in road backfill as a substitute for soil. This paper reviews some mining tailings, mine waste rocks and some slags obtained in the exploitation and/or processing of some ores including iron, gold, lead, phosphate, copper, coal, etc. Different physical properties, mechanical properties, chemical properties, heavy metal content, mineralogic composition, geotechnical properties and environmental properties (leaching test) of the mine wastes were examined. The physical, mechanical and environmental properties of the materials obtained by substitution of raw materials by mine waste were examined and compared to reference materials. Mining waste in cementitious materials offers good compressive strengths, while the porosity of the concrete and/or mortar is a factor influencing its toxicity. As for the waste in fired bricks, fired at a temperature of 900°C or more, it offers convincing compressive and flexural strengths. The few research studies obtained on the use of mining waste in road embankments have shown that mining waste can be used as a sub-base layer and backfill as long as it is not toxic. In addition, several other mining wastes require special attention as substitutes for raw materials in construction materials, such as coltan, cobalt.