Controllable In situ Polymerization of 1,3‐Dioxolane via Sustained‐Release Effect for Solid‐State Lithium Metal Batteries
Sucheng Liu, Boyong Wu, Song Huang, Zitian Lin, Huiyu Song, Li Du, Zhenxing Liang, Zhiming Cui
Abstract
Abstract In situ formed poly(1,3‐dioxolane) (PDOL) electrolytes are of great interest due to the facile process and the improved interface contact. However, the practical application of in situ PDOL electrolytes is still plagued by fast solidification time (liquid state) and poor high‐voltage stability (solid state). Herein, the slow‐release carriers triglycidyl isocyanurate (TGIC), which play dual roles as initiator sustained‐release and network confinement, can tune DOL curing time and cathode/electrolyte interface chemistry is demonstrated. Specifically, the electronegative C≐O and epoxy groups in TGIC have an affinity with BF 3 , the decomposition product of lithium bis(oxalate)borate (LiDFOB), delaying BF 3 protonation reaction and thus extending DOL solidification time. In addition, the epoxy groups in TGIC serve as crosslinking sites to form in situ crosslinked polymer electrolytes (TPDOL@FEC). The corresponding network structure suppresses the contact reaction between high‐fluidity organic components and cathodes, generating a uniform and thin cathode electrolyte interface layer. As a result, the TPDOL@FEC precursor solution can remain its liquid state even after resting 24 h at room temperature. The assembled LiNi 0.6 Co 0.2 Mn 0.2 O 2 ||TPDOL@FEC||Li cells display an impressive capacity retention of 91.5% after 100 cycles at 4.4 V (0.5 C). This study is expected to be a leap in the pursuit of practically feasible in situ formed PDOL electrolytes.