Experimental Investigation of Thermal Conductivity of Selected 3D-Printed Materials
Maria Tychanicz-Kwiecień, Sebastian Grosicki, Marek Markowicz
Abstract
This study presents the results of experimental studies on the thermal conductivity of specimens made from selected pure polymer filaments manufactured with the use of FFF 3D-printing technology. The tested samples were made of polylactic acid (PLA), polyethylene terephthalate glycol (PET-G), and acrylonitrile butadiene styrene (ABS). In particular, the effects of the infill patterns and infill density on the tested samples were examined in order to characterize the influence of these parameters on the materials' effective thermal conductivity. Honeycomb and grid infill patterns of the tested samples with infill densities of 40%, 60%, 80%, and 100% were examined. The influence of temperature on thermal conductivity was studied as well. Thermal conductivity was measured using the guarded heat flow method, according to the ASTM E1530 standard within the defined temperature ranges of 20-60 °C for ABS and PET-G and 20-50 °C for PLA material. Samples of the tested materials were manufactured with the use of the Fused Filament Fabrication method (FFF), and filaments with a uniform black color were used. The obtained results were analyzed in terms of thermal conductivity variation after samples' infill pattern and infill density modifications, which provides extended thermal property characterization of the polymeric filaments adopted for 3D printing.