Surface-Modified Graphene Oxide/Lead Sulfide Hybrid Film-Forming Ink for High-Efficiency Bulk Nano-Heterojunction Colloidal Quantum Dot Solar Cells
Yaohong Zhang, Guohua Wu, Chao Ding, Feng Liu, Dong Liu, Taizo Masuda, Kenji Yoshino, Shuzi Hayase, Ruixiang Wang, Qing Shen
Abstract
Abstract Solution-processed colloidal quantum dot solar cells (CQDSCs) is a promising candidate for new generation solar cells. To obtain stable and high performance lead sulfide (PbS)-based CQDSCs, high carrier mobility and low non-radiative recombination center density in the PbS CQDs active layer are required. In order to effectively improve the carrier mobility in PbS CQDs layer of CQDSCs, butylamine (BTA)-modified graphene oxide (BTA@GO) is first utilized in PbS-PbX 2 (X = I − , Br − ) CQDs ink to deposit the active layer of CQDSCs through one-step spin-coating method. Such surface treatment of GO dramatically upholds the intrinsic superior hole transfer peculiarity of GO and attenuates the hydrophilicity of GO in order to allow for its good dispersibility in ink solvent. The introduction of BTA@GO in CQDs layer can build up a bulk nano-heterojunction architecture, which provides a smooth charge carrier transport channel in turn improves the carrier mobility and conductivity, extends the carriers lifetime and reduces the trap density of PbS-PbX 2 CQDs film. Finally, the BTA@GO/PbS-PbX 2 hybrid CQDs film-based relatively large-area (0.35 cm 2 ) CQDSCs shows a champion power conversion efficiency of 11.7% which is increased by 23.1% compared with the control device.