Damping rate measurements and predictions for gravity waves in an air–oil–water system
Girish Kumar Rajan
Abstract
Dissipation of standing gravity waves of frequencies within 1–2 Hz is investigated experimentally. The waves are generated in a rectangular tank filled with water, the surface of which is covered with an oil layer of mean thickness, d. Damping rates are measured as a function of d, and compared with results from established theoretical models—in particular, with those from a recently developed three-fluid dissipation model that considers waves in a system of semi-infinitely deep fluids that lie above and below an interfacial fluid layer of finite thickness. Based on a comparison of experimental data with predictions, the oil–water interfacial elasticity, E2, is empirically determined to be a linear function of d. The theoretical predictions include contributions from the three-fluid dissipation model, which accounts for energy losses due to shear layers at the interfaces, friction in the fluid bulk, and compression–expansion oscillations of the elastic interfaces; and from a boundary-layer dissipation model, which accounts for energy losses due to boundary layers at the tank's solid surfaces. The linear function, E2(d), is used to compute the three-fluid model damping rate. An effective viscosity of the oil–water system is used to compute the boundary-layer model damping rate. The theoretical predictions are, on average, within 5% of measurements for all the wave frequencies considered. The promise shown by the three-fluid model is highlighted, as are the assumptions involved in the analysis and comparisons.