Efficient approaches for building-integrated photovoltaic modules: Advancements in phase change materials and fin designs
Sami Kaplan, Seyedmojtaba Sajadian, Jasim M. Mahdi, Hayder I. Mohammed, Mohammadreza Ebrahimnataj Tiji, Koorosh Khosravi, Surojit Sen, Pouyan Talebizadehsardari
Abstract
Building-integrated photovoltaics (BIPV) offer a sustainable energy solution yet encounter challenges such as low solar-to-electric conversion efficiency. Furthermore, elevated operating temperatures can degrade BIPV performance and reliability. This study explores the use of phase change materials (PCMs) and optimized fin configurations to reach for an effective PV temperature regulation with minimal PCM/fin usage. The research explores PCM charging, heat storage, and the dependencies of PV electrical efficiency. T-shaped and Y-shaped fins are considered to enhance heat transfer and temperature regulation. The optimization leads to improved conversion efficiency, with additional fins improving thermal management. Key results highlight parameters that enable near-complete PCM melting and effective heat regulation. The Y-shaped fins case presents a better performance than the other cases (No-fins, straight fins, and T-fins) due to a higher heat transfer surface area, leading to a 93.4 % melting rate after 3600 s with 8 fins. Moreover, as the number of fins increases, convective heat transfer decreases due to internal fin proximity. Furthermore, more fins improve heat transport from PV to PCM, resulting in faster energy storage rates. Overall, optimizing PCM mass and fin design can enhance the heat storage capacity by up to 18 % and improve PV electrical efficiency by up to 3.1 %. • Integrated PCM and fin arrays are fine-tuned for better PV system performance. • PCM charge time, heat storage rate, and electrical efficiency are explored. • Findings reveal factors enabling complete PCM melting and superior thermal control. • Adjusting PCM volume boosts heat storage by up to 18 % and PV efficiency by 3 %.