Litcius/Paper detail

Investigation on the electron density and temperature in a nanosecond pulsed helium plasma jet with Thomson scattering

Fan Wu, Jiayin Li, Yubin Xian, Xiao Tan, Xinpei Lu

2021Plasma Processes and Polymers24 citationsDOI

Abstract

Abstract Diagnostic of spatiotemporal distribution of the electron density and temperature of atmospheric pressure plasma jets is a difficult task, as Thomson scattering, which is the most used measurement, suffers from the stray light induced by Rayleigh scattering. In this paper, a new strategy is reported to restrain the stray light in Thomson scattering. With a physical mask placed at the output of a single spectrometer, the scattering signal is obtained with a relatively high ratio of signal to noise. The electron density in a pulsed kHz‐driven atmospheric plasma jet interacting with a dielectric target is measured by using this method. A donut‐shaped distribution of electron density is observed at an axial position 1 mm away from the nozzle. The radius of the ring structure decreases with the reduction of the gas flow rate. The electron density reaches a maximum of about 4.5 × 10 20 m −3 at a delay time of 150 ns from the onset of the pulse. A similar time relationship between the electron density and plasma emission intensity is also identified. Higher applied voltage leads to a faster increasing and a higher peak value of the electron density. Pulse width shows little impact on the generation and decay of electrons.

Topics & Concepts

Thomson scatteringElectron densityAtomic physicsScatteringRayleigh scatteringElectron temperatureElectronNanosecondPlasmaJet (fluid)Materials scienceOpticsPhysicsLaserNuclear physicsThermodynamicsPlasma Applications and DiagnosticsPlasma Diagnostics and ApplicationsLaser-induced spectroscopy and plasma
Investigation on the electron density and temperature in a nanosecond pulsed helium plasma jet with Thomson scattering | Litcius