Electrochemical detection of heavy metal ions in water using MWCNT/ZnO nanocomposite
Xiang Zhou
Abstract
A nanocomposite of multi-walled carbon nanotubes (MWCNTs) decorated with zinc oxide nanoparticles (ZnO NPs) was fabricated via an in-situ hydrothermal approach and implemented as a modified electrode for stripping voltammetric detection of dissolved heavy metal ions. The MWCNT/ZnO exhibited a high specific surface area of 53 m2/g and charge transfer conductivity amplified to 26 S/cm. By square wave voltammetry, the nanocomposite sensor achieved wide linear detection of Cu(II) from 1-800 ppb, Pb(II) from 5-1000 ppb, and Hg(II) from 1-900 ppb, along with low limits of detection reaching 0.8, 1.2, and 0.7 ppb, respectively. The 3-5X enhanced sensitivity versus an unmodified screen-printed carbon electrode confirms performance gains supplied by the tailored hybrid interface. Selectivity testing produced distinct, well-resolved oxidation peaks for each metal ion target that remained unaffected by high off-target concentrations of Mn(II), Co(II), and Fe(III) interferents. Accurate spike recoveries between 95-102% were obtained from quantifying ternary mixtures across various Cu(II):Pb(II):Hg(II) compositions, substantiating the capability for simultaneous multianalyte analysis. The simple preparation, high sensitivity and selectivity, and accuracy for direct water testing validates the nanocomposite as a practical portable sensor for on-site toxic heavy metal detection.