Record RF Power Performance at 94 GHz From Millimeter-Wave N-Polar GaN-on-Sapphire Deep-Recess HEMTs
Weiyi Li, Brian Romanczyk, Matthew Guidry, Emre Akso, Nirupam Hatui, Christian Wurm, Wenjian Liu, Pawana Shrestha, Henry Collins, Christopher Clymore, S. Keller, Umesh K. Mishra
Abstract
In this article, N-polar GaN-on-sapphire deep-recess metal–insulator–semiconductor (MIS)-high-electron-mobility transistors (HEMTs) with a breakthrough performance at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${W}$ </tex-math></inline-formula> -band are presented. Compared with prior N-polar GaN MIS-HEMTs, a thin GaN cap layer and atomic layer deposition (ALD) ruthenium (Ru) gate metallization were used along with high-quality GaN-on-sapphire epitaxy from Transphorm Inc. Before SiN passivation, 94 GHz large signal load–pull shows that the transistor obtains a record-high 9.65 dB linear transducer gain and demonstrated 42% power-added efficiency (PAE) with associated 4.4 W/mm of output power density at 12 V drain bias. By biasing the drain at 8 V, the device shows an even higher PAE of 44% with an associated 2.6 W/mm of output power density. After SiN passivation, the fabricated N-polar GaN-on-sapphire HEMTs show a high PAE of 40.2% with an associated 4.85 W/mm of output power density. Furthermore, a very high output power density of 5.83 W/mm with 38.5% PAE is demonstrated at a 14 V drain bias. This power performance shows significant efficiency improvement over previous N-polar GaN-on-SiC and demonstrates a combined efficiency and power density beyond what has been reported for Ga-polar devices, in spite of the low-thermal-conductivity sapphire substrate. This shows that N-polar GaN-on-sapphire technology is an attractive candidate for millimeter-wave power amplifier applications with simultaneous high efficiency and power density.