Blade Crack Detection using Blade Tip Timing
Shuming Wu, Zengkun Wang, Haoqi Li, Zhibo Yang, Shaohua Tian, Ruqiang Yan, Shibin Wang, Xuefeng Chen
Abstract
The harsh working environment of compressor threats the integrality of bladed disk. Crack is one of the most fatal faults of rotating blades. Detecting the crack of blades at early stage could ensure the safe operation of gas turbine and save economic costs. Blade tip timing (BTT) is a noncontact blade vibration measurement technique, which is widely used in recent years. In this article, a procedure of crack detection using BTT data is proposed. First, some typical parameters are taken into consideration, including resonance frequency, amplitude change of natural frequency, amplitude of blade tip, phase, and interblade spacing. It has been found that the frequency of the blade will decrease with the increment of crack length and reduction of crack height. In addition, the resonance frequency of the bladed disk will split when the blade cracks. The amplitude of different orders of resonance frequency varies with cracks. The amplitude of the first order changes very slightly, whereas the second and third orders are relatively obvious. The blade tip vibration amplitude and phase change with cracks without obvious regularity. The interblade distance will change due to the appearance of cracks. According to the above rules, the frequency and the interblade distance are adopted as crack diagnosis indicators. First, we use the Lomb-Scargle periodogram to quickly determine whether the crack appears and then use the blade frequency and interblade distance to locate the number of the blade having crack. In the experimental test, BTT data measured on a titanium bladed disk is used to verify the effectiveness of our method.