Optimization of dual-layer flow field in a water electrolyzer using a data-driven surrogate model
Lizhen Wu, Zhefei Pan, Shu Yuan, Xiaoyu Huo, Qiang Zheng, Xiaohui Yan, Liang An
Abstract
• VOF method is utilized to investigate the effects of different degassing layer and base heights on the bubble behavior in channel. • The optimization framework combing DNN and GA is conducted to accelerate the optimization of flow field. • The reliability of the optimization scheme is validated by bubble visualization and electrochemical characterization. Serious bubble clogging in flow-field channels will hinder the water supply to the electrode of proton exchange membrane water electrolyzer (PEMWE), deteriorating the cell performance. In order to address this issue, the dual-layer flow field design has been proposed in our previous study. In this study, the VOF (volume of fluid) method is utilized to investigate the effects of different degassing layer and base heights on the bubble behavior in channel and determine the time for the bubbles to detach from the electrode surface. However, it is very time-consuming to get the optimal combination of base layer and degassing layer heights due to the large number of potential cases, which needs to be calculated through computation-intensive physical model. Therefore, machine learning methods are adopted to accelerate the optimization. A data-driven surrogate model based on deep neural network (DNN) is developed and successfully trained using data obtained by the physical VOF method. Based on the highly efficient surrogate, genetic algorithm (GA) is further utilized to determine the optimal heights of base layer and degassing layer. Finally, the reliability of the optimization was validated by bubble visualization in channel and electrochemical characterization in PEMWE through experiments.