Bay Leaves Extracts as Active Additive for Food Protective Coatings
Manuel Peña-Ortiz, Luis Serrano, Antonio A. Romero, Araceli Garcı́a
Abstract
Ethanolic extracts of bay leaves were obtained using the Soxhlet method (extraction yield of 22.3 ± 1.2%) and further analyzed through different methods, thus determining the chemical composition with gas chromatography, phenolic content with the Folin–Ciocalteu technique (11.8 ± 0.4% wt.) and antioxidant power with the radical 2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) method (75.06%). Furthermore, its effect on the growth of two bacteria, Escherichia coli and Bacillus cereus, and on two yeasts, Candida glabrata and Saccharomyces cerevisiae, was determined, showing a minimum inhibitory concentration of 0.65 mg/mL on the growth of B. cereus. Finally, edible films were prepared using different polymers (carboxymethyl cellulose, gum Arabic, polyvinyl pyrrolidone, and polyvinyl alcohol) containing 0, 5, 10, or 15% wt. of bay leaf extract as troubleshooting for perishable fruits, specifically for cultivated strawberry. The prepared composites presented reduced water vapor permeabilities (up to 4.3 × 10−7 g·Pa−1·m−1·h−1), high specific transparencies (≈30%/mm), as well as the effective blocking of ultraviolet radiation (>99.9%). In vivo tests showed that the most suitable treatment for strawberry protection was the impregnation with a composite comprising polyvinyl alcohol and a 15% wt. bay leaf extract, resulting in a noteworthy reduction in mass loss (22% after 6 days). It can be asserted that food packaging with the designed composites would be an effective alternative for the reduction in postharvest losses.