Modularization of 2- and 3-DoF Coupled Tendon-Driven Joints
Wenyang Li, Peng Chen, Dianchun Bai, Xiaoxiao Zhu, Shunta Togo, Hiroshi Yokoi, Yinlai Jiang
Abstract
This article proposes coupled tendon-driven joint modules for anthropomorphic robots. Fully actuated 2-degree-of-freedom (DoF) and 3-DoF joint modules are classified and analyzed based on the motor-joint routing matrix that describes the tendon routing structure between the motors and the joints. Two-motor 2-DoF (2M2D) modules, which share the same form of motor-joint routing matrix, are classified into four types: externally actuated, internally coaxially actuated, internally separately actuated, and hybrid-actuated according to the location of the motors. Three-motor 3-DoF (3M3D) modules are classified into four forms based on the four possible forms of motor-joint routing matrix: fully routed motor-joint, 1-unrouted motor-joint, 2-unrouted motor-joint, and 3-unrouted motor-joint. The 2M2D and 3M3D coupled tendon-driven joint modules are analyzed and compared with respect to the relationship between the motor torque and the joint torque. A 7-DoF anthropomorphic robot arm was implemented with one 3M3D module for the shoulder joint and two 2M2D modules for the elbow and wrist joints, respectively, to demonstrate the utility of the proposed joint modules. The arm weighed 2.2 kg and was able to lift a 1.5-kg load with full outreach. The characteristics of the joint modules were evaluated in a current consumption experiment and a position accuracy experiment, and the performance of the robot arm was evaluated in a master-slave manipulation experiment involving dexterous movements.