Challenges in Product Selectivity for Electrocatalytic Reduction of Amine-Captured CO<sub>2</sub>: Implications for Reactive Carbon Capture
Aneelman Brar, Xinran S. Wang, C. N. Gillis, Jenny Y. Yang, Michael Findlater
Abstract
High Resolution Image Download MS PowerPoint Slide CO 2 is a potential feedstock for carbon-based fuels or materials, but is only available in dilute streams. Integrated processes for CO 2 capture and conversion directly valorize the CO 2 captured by sorbent materials, skipping the energetically expensive sorbent regeneration step. Amines are the most heavily studied liquid-phase sorbent materials for CO 2 capture from dilute streams. Amines react with CO 2 in a 2:1 ratio to form the corresponding ammonium carbamate. Ammonium carbamate [NH 4 ][H 2 NCO 2 ] was tested as the substrate using the highly selective and robust CO 2 -to-formate reduction electrocatalyst [( tBu POCOP)Ir(H)(NCCH 3 ) 2 ], where ( tBu POCOP) is the tridentate pincer ligand 2,6-bis(di tert -butyl-phosphonito). When ammonium carbamate was used as the substrate instead of CO 2, only hydrogen was produced. An equivalent electrolysis with ammonium hexafluorophosphate with CO 2 also resulted in primarily hydrogen. Methyl carbamate and urea were also tested as substrates as proxies for carbamate that do not contain an equivalent of ammonium, and there was also negligible reduction to carbon-based products. These results indicate that the loss of selectivity observed for amine-captured CO 2, or ammonium carbamate, is likely due to the generation of the acidic ammonium equivalent as well as the greater challenge of reducing carbamate compared to CO 2 . This study illustrates that catalysts with high selectivity for concentrated CO 2 can favor hydrogen evolution and loss of carbon-based products when amine-captured CO 2 is used instead.