Influence of red mud and waste glass on the microstructure, strength, and leaching behavior of bottom ash-based geopolymer composites
Constantin Bobirică, Cristina Orbeci, Liliana Bobirică, P. Palade, Călin Deleanu, Cristian Pantilimon, Cristian Pîrvu, Ionut‐Cristian Radu
Abstract
Abstract The influence of waste glass and red mud addition as alternative source of aluminosilicate precursors on the microstructural, mechanical, and leaching properties of bottom ash-based geopolymer was studied in this work through mineralogical, morphological, and spectroscopic analysis, as well as by conducting compressive strength and leaching tests. The bottom ash-based geopolymer composites were synthesized by adding a constant amount of waste glass (10% by weight) and increasing amounts of red mud (up to 30% by weight). The results derived from FTIR, 29 Si and 27 Al MAS NMR, and SEM–EDX revealed that adding up to 10% (by weight) red mud to the synthesis mixes leads to an increase in the degree of geopolymerization of the activated mixes. The compressive strength followed the same trend. An increase of more than 10% (by weight) red mud added to the synthesis mixes results in a significant decrease of compressive strength of the geopolymer composites. A low leachability of geopolymer composites in regard with their contaminants was revealed especially for those with good compressive strength.