Internal standard application strategies in mass spectrometry imaging by desorption electrospray ionization mass spectrometry
Consuelo J. Perez, Demian R. Ifa
Abstract
RATIONALE: We developed a model case study to evaluate three internal standard (IS) application strategies (methods I-III) using the psycholeptic phenobarbital (PB) and the isotopically labelled IS phenobarbital-D5 (PB-D5) from in vitro dosed tissues of the golden apple snail (Pomacea diffusa) by desorption electrospray ionization mass spectrometry imaging (DESI-MSI). METHODS: In method I, the IS was deposited as microspots on top of 10 μm thick snail tissues; in method II, a thin IS film was applied; and in method III, the IS was spiked into the DESI solvent spray. DESI-MSI analyses were performed using a Thermo LTQ mass spectrometer equipped with a custom-built DESI source and two-dimensional moving stage. PB (m/z 231) and PB-D5 (m/z 236) were monitored in selected ion monitoring mode between m/z 227 and 239. RESULTS: The analytical performance of two IS strategies (methods I and II) in DESI-MSI was evaluated based on an intra- and inter-day precision assay, an accuracy assessment, and statistical analysis. In the inter-day DESI-MSI assay, method I exhibited better precision (6.5%-7.4%) than method II (10.7%-17.6%) between 10 and 100 ng/μL. In the accuracy assessment, PB quality controls of 75 ng/μL were back-calculated as 71 ± 4 and 83 ± 9 ng/μL, resulting in relative errors of -5% and 11% for methods I and II, respectively. Method III did not work under the experimental design and was not evaluated. CONCLUSIONS: Three IS application strategies were investigated and compared for a routine quantitative DESI-MSI approach. Methods I and II were not statistically significantly different as shown by a Bland-Altman plot, suggesting that these two methods can be used interchangeably. However, method III requires further research for future quantitative DESI-MSI analyses.